Public

If the given result is different to cublasStatus.CUBLAS_STATUS_SUCCESS and
exceptions have been enab

checkResult

Obtain the current CUBLAS status by calling cublasGetErrorNative, and store the
result as the lastRe

checkResultBLAS

cublasAllocNative

cublasCaxpyNative

cublasCcopyNative

cublasCdotcNative

cublasCdotuNative

cublasCgbmvNative

cublasCgemmNative

cublasCgemvNative

cublasCgercNative

cublasCgeruNative

cublasChbmvNative

cublasChemmNative

cublasChemvNative

cublasCher2Native

cublasCher2kNative

cublasCherNative

cublasCherkNative

cublasChpr2Native

Gson

Creating JSON documents from java classes using gson

Signals that an I/O exception of some sort has occurred. This class is the
general class of exceptio

java.io.IOException

This class represents proxy server settings. A created instance of Proxy stores
a type and an addres

java.net.Proxy

A Comparator is used to compare two objects to determine their ordering with
respect to each other. 

java.util.Comparator

Resource bundles contain locale-specific objects. When your program needs a
locale-specific resource

java.util.ResourceBundle

A sequence of elements supporting sequential and parallel aggregate operations.
The following exampl

java.util.stream.Stream

Operations on java.lang.String that arenull safe.

 * IsEmpty/IsBlank - checks if a String contains 

org.apache.commons.lang.StringUtils

Return the original filename in the client's filesystem.This may contain path
information depending 

getOriginalFilename

Creates and executes a periodic action that becomes enabled first after the
given initial delay, and

scheduleAtFixedRate

findViewById

/**
     * <pre>
     * void cublasStbsv (char uplo, char trans, char diag, int n, int k,
     *                   const float *A, int lda, float *X, int incx)
     *
     * solves one of the systems of equations op(A)*x = b, where op(A) is either
     * op(A) = A or op(A) = transpose(A). b and x are n-element vectors, and A is
     * an n x n unit or non-unit, upper or lower triangular band matrix with k + 1
     * diagonals. No test for singularity or near-singularity is included in this
     * function. Such tests must be performed before calling this function.
     *
     * Input
     * -----
     * uplo   specifies whether the matrix is an upper or lower triangular band
     *        matrix as follows: If uplo == 'U' or 'u', A is an upper triangular
     *        band matrix. If uplo == 'L' or 'l', A is a lower triangular band
     *        matrix.
     * trans  specifies op(A). If trans == 'N' or 'n', op(A) = A. If trans == 'T',
     *        't', 'C', or 'c', op(A) = transpose(A).
     * diag   specifies whether A is unit triangular. If diag == 'U' or 'u', A is
     *        assumed to be unit triangular; thas is, diagonal elements are not
     *        read and are assumed to be unity. If diag == 'N' or 'n', A is not
     *        assumed to be unit triangular.
     * n      specifies the number of rows and columns of the matrix A. n must be
     *        at least zero.
     * k      specifies the number of super- or sub-diagonals. If uplo == 'U' or
     *        'u', k specifies the number of super-diagonals. If uplo == 'L' or
     *        'l', k specifies the number of sub-diagonals. k must be at least
     *        zero.
     * A      single precision array of dimension (lda, n). If uplo == 'U' or 'u',
     *        the leading (k + 1) x n part of the array A must contain the upper
     *        triangular band matrix, supplied column by column, with the leading
     *        diagonal of the matrix in row (k + 1) of the array, the first super-
     *        diagonal starting at position 2 in row k, and so on. The top left
     *        k x k triangle of the array A is not referenced. If uplo == 'L' or
     *        'l', the leading (k + 1) x n part of the array A must constain the
     *        lower triangular band matrix, supplied column by column, with the
     *        leading diagonal of the matrix in row 1 of the array, the first
     *        sub-diagonal starting at position 1 in row 2, and so on. The bottom
     *        right k x k triangle of the array is not referenced.
     * x      single precision array of length at least (1 + (n - 1) * abs(incx)).
     *        On entry, x contains the n-element right-hand side vector b. On exit,
     *        it is overwritten with the solution vector x.
     * incx   storage spacing between elements of x. incx must not be zero.
     *
     * Output
     * ------
     * x      updated to contain the solution vector x that solves op(A) * x = b.
     *
     * Reference: http://www.netlib.org/blas/stbsv.f
     *
     * Error status for this function can be retrieved via cublasGetError().
     *
     * Error Status
     * ------------
     * CUBLAS_STATUS_NOT_INITIALIZED  if CUBLAS library has not been initialized
     * CUBLAS_STATUS_INVALID_VALUE    if incx == 0, n < 0 or n > 4070
     * CUBLAS_STATUS_EXECUTION_FAILED if function failed to launch on GPU
     * </pre>
     */

/**
   * <pre>
   * void cublasStbsv (char uplo, char trans, char diag, int n, int k,
   *                   const float *A, int lda, float *X, int incx)
   *
   * solves one of the systems of equations op(A)*x = b, where op(A) is either 
   * op(A) = A or op(A) = transpose(A). b and x are n-element vectors, and A is
   * an n x n unit or non-unit, upper or lower triangular band matrix with k + 1
   * diagonals. No test for singularity or near-singularity is included in this
   * function. Such tests must be performed before calling this function.
   *
   * Input
   * -----
   * uplo   specifies whether the matrix is an upper or lower triangular band 
   *        matrix as follows: If uplo == 'U' or 'u', A is an upper triangular
   *        band matrix. If uplo == 'L' or 'l', A is a lower triangular band
   *        matrix.
   * trans  specifies op(A). If trans == 'N' or 'n', op(A) = A. If trans == 'T',
   *        't', 'C', or 'c', op(A) = transpose(A).
   * diag   specifies whether A is unit triangular. If diag == 'U' or 'u', A is
   *        assumed to be unit triangular; thas is, diagonal elements are not
   *        read and are assumed to be unity. If diag == 'N' or 'n', A is not
   *        assumed to be unit triangular.
   * n      specifies the number of rows and columns of the matrix A. n must be
   *        at least zero.
   * k      specifies the number of super- or sub-diagonals. If uplo == 'U' or
   *        'u', k specifies the number of super-diagonals. If uplo == 'L' or
   *        'l', k specifies the number of sub-diagonals. k must be at least
   *        zero.
   * A      single precision array of dimension (lda, n). If uplo == 'U' or 'u',
   *        the leading (k + 1) x n part of the array A must contain the upper
   *        triangular band matrix, supplied column by column, with the leading
   *        diagonal of the matrix in row (k + 1) of the array, the first super-
   *        diagonal starting at position 2 in row k, and so on. The top left 
   *        k x k triangle of the array A is not referenced. If uplo == 'L' or 
   *        'l', the leading (k + 1) x n part of the array A must constain the
   *        lower triangular band matrix, supplied column by column, with the
   *        leading diagonal of the matrix in row 1 of the array, the first
   *        sub-diagonal starting at position 1 in row 2, and so on. The bottom
   *        right k x k triangle of the array is not referenced.
   * x      single precision array of length at least (1 + (n - 1) * abs(incx)). 
   *        On entry, x contains the n-element right-hand side vector b. On exit,
   *        it is overwritten with the solution vector x.
   * incx   storage spacing between elements of x. incx must not be zero.
   *
   * Output
   * ------
   * x      updated to contain the solution vector x that solves op(A) * x = b.
   *
   * Reference: http://www.netlib.org/blas/stbsv.f
   *
   * Error status for this function can be retrieved via cublasGetError().
   *
   * Error Status
   * ------------
   * CUBLAS_STATUS_NOT_INITIALIZED  if CUBLAS library has not been initialized
   * CUBLAS_STATUS_INVALID_VALUE    if incx == 0, n < 0 or n > 4070
   * CUBLAS_STATUS_EXECUTION_FAILED if function failed to launch on GPU
   * </pre>
   */

How to use cublasStbsvNativemethodin jcuda.jcublas.JCublas

Best Java code snippets using jcuda.jcublas.JCublas.cublasStbsvNative (Showing top 6 results out of 315)

How to use
cublasStbsvNative
method
in
jcuda.jcublas.JCublas